Made for your room.
Seven disciplines, one workshop. Every piece below is surveyed on site, drawn to scale, priced individually and installed by our own fitters — never ordered from a catalogue and adjusted to fit.
01
Custom Kitchens
A kitchen is the hardest room in the house to get right, because it has to work before it can be beautiful. We start with your appliances, your storage and your walls — then design the cabinetry around them.
We survey the room ourselves, so the drawings account for the out-of-square wall, the low soffit and the window reveal that a catalogue kitchen would ignore. Carcases are cut on our own beam saw to the millimetre, edged, and dry-assembled in the workshop before anything reaches your home.
Worktops are templated after the cabinets are set, not before. It takes an extra visit, and it is the reason our joints close.
- Site survey and laser-measured drawings
- Full-height, tall, base and wall units
- Soft-close hinges and runners as standard
- Granite, quartz and solid-surface worktops
- Integrated appliance housings and service voids
- Handleless, J-profile or hardware-led fronts
- Typical lead time
- 5 – 8 weeks from approved drawings
- Pricing
- Quoted per project
02
Wardrobes & Walk-in Closets
Fitted storage earns its cost in the centimetres a free-standing wardrobe throws away — the gap at the top, the dead corner, the depth you never use.
We begin with an inventory: how much hanging you need long versus short, how many drawers, how many pairs of shoes. The interior is drawn to that list, then the exterior is drawn to the room.
Sliding doors for tight rooms, hinged for everything else, and a dressing-room layout when there is space to walk in. Lighting, mirrors and jewellery trays are designed in rather than added later.
- Floor-to-ceiling, scribed to walls and ceiling
- Hinged, sliding or open-frame configurations
- Long hanging, short hanging, shelving and drawers
- Shoe racks, trouser pull-outs and jewellery inserts
- Integrated LED lighting and mirrors
- Matching bedside and dressing units
- Typical lead time
- 4 – 6 weeks from approved drawings
- Pricing
- Quoted per project
03
TV & Media Units
The difference between a media unit and a good media unit is whether you can see a single cable. Everything else is cabinetry.
We plan the unit around the screen size, the seating height and the equipment that has to breathe — then design service voids, brush plates and ventilation into the carcase.
Floating units get concealed steel brackets rated well beyond the load. Full media walls can carry integrated shelving, uplighting, a fireplace recess or a display run that continues around the room.
- Wall-hung floating or floor-standing builds
- Concealed cable routes and brush plates
- Ventilated compartments for AV equipment
- Integrated LED wash lighting
- Push-to-open or handleless drawer fronts
- Full-wall media walls with display shelving
- Typical lead time
- 3 – 5 weeks from approved drawings
- Pricing
- Quoted per project
04
Vanities & Washroom Joinery
Washroom joinery fails for one reason: the wrong board. We specify moisture-resistant substrates and sealed edges everywhere water can reach.
Vanities are built around the basin you have chosen — counter-top, semi-recessed or under-mounted — with the trap and service pipework drawn in so the drawer still opens.
We make matching mirror cabinets, tall linen storage and back-to-wall WC units so the whole room reads as one piece of furniture.
- Moisture-resistant board and sealed edging
- Counter-top, semi-recessed or under-mounted basins
- Wall-hung or floor-standing
- Mirror cabinets with integrated lighting
- Matching tall and linen storage
- Solid-surface, quartz or granite counters
- Typical lead time
- 3 – 5 weeks from approved drawings
- Pricing
- Quoted per project
05
Centre & Occasional Tables
A centre table is the one piece of furniture everyone in the room looks at. It is small enough to over-engineer, and we do.
Solid timber, veneered panel, stone tops, glass, brushed metal frames — we make in all of them, and we make in sets so the console, side tables and centre table share a language.
Because the piece is loose rather than fitted, this is where clients tend to take the most risk: a live-edge slab, a fluted drum base, a travertine top on a blackened steel frame.
- Solid timber, veneer, stone, glass and metal
- Coffee, console, side and nesting tables
- Matched sets across a living room
- Hidden storage and lift-top mechanisms
- Hand-finished edges and joinery details
- Made to any footprint you need
- Typical lead time
- 2 – 4 weeks from approved drawings
- Pricing
- Quoted per piece
06
Reception & Office Desks
A reception desk is a brand statement that also has to hide a printer, three cables and a filing drawer. Both jobs matter.
We build curved and straight counters with a raised transaction top, concealed service voids, DDA-compliant lower sections and space for the equipment reception actually uses.
Beyond the front desk we make executive desks, credenzas, meeting tables, workstation runs and full office storage walls — all in the same finish family so the floor reads as one fit-out.
- Curved and straight reception counters
- Raised transaction tops and lowered access sections
- Concealed cable management and power
- Executive desks, credenzas and meeting tables
- Workstation runs and screen systems
- Branded front panels with applied logos
- Typical lead time
- 4 – 7 weeks from approved drawings
- Pricing
- Quoted per project
07
Full Interior Fit-Out
When every room is being touched, splitting the work between trades is how programmes slip. We would rather hold the whole thing.
We take on complete residential and commercial interiors: joinery throughout, wall panelling, ceiling detailing, doors, flooring coordination, lighting positions and the finishing schedule that ties them together.
One drawing set, one site team, one point of contact — and a sequence that lets the trades that follow us work cleanly.
- Residential and commercial fit-outs
- Joinery packages across every room
- Wall panelling and ceiling detailing
- Doors, architraves and skirting
- Finish and material schedules
- Single programme, single point of contact
- Typical lead time
- Programmed per project
- Pricing
- Quoted per project
Specification
Materials, finishes and hardware.
You can specify all of it, some of it, or none of it. Choose “advise me” anywhere in the quote request and we will propose a specification with the price.
Materials and surface systems
- MDF — Fine-fibre engineered board for routed, sprayed and painted panels
- MFC — Melamine-faced chipboard for durable cabinets, wardrobes and office storage
- High-gloss acrylic — Reflective premium fronts with a clean contemporary finish
- Glass and aluminium — Framed display doors, glazed fronts and shelving details
- MR board — Moisture-resistant board for kitchens, washrooms and humid areas
- Chipboard / particleboard — Practical engineered board for cabinetry and internal components
- Not sure — advise me — We will propose the right material for the room and use
Finishes
Hardware
Colour directions
Not everything needs a survey.
Fitted work is always quoted individually — it has to be, because it is drawn around your walls. Loose pieces in fixed sizes are a different thing: those will be published at a fixed price in our online store, ready to buy without a site visit.